DC means amazing results with all the advantages of the latest electronic technology: rather than using alternating current, RiX70 DC applies a nearly constant potential to the tube.
This constant potential supplies the tube with DC current, resulting in a constant stream of consistent radiation that maintains the preset kV values even with mains fluctuations.
RiX70 DC - HIGH FREQUENCY INTRAORAL X-RAY GENERATOR
RiX70 DC: modern design for practical operations.
- AUTOMATIC VOLTAGE TRANSFORMER
RiX70 DC appropriately operates in a range of 100 to 240 V. The electrical system automatically detects the power wattage, allowing a safe and proper functioning with any voltage. - 0.4 mm FOCAL SPOT
For sharper images with better defined edges.
This focal spot produces less divergence of the X-ray beam from focal spot to receptor which means less penumbra or edge unsharpness around the object. - REDUCTION OF RADIATION DOSE
The high frequency generator allows radiation stability eliminating the soft radiation that does not produce images but can be harmful for the patient. - TUBE VOLTAGE SELECTOR
RiX70 DC operates either 60, 65 or 70 kV allowing to reach excellent results to satisfy your needs: Voltage 60 kV for caries detection or periodontal applications; 70 kV for endodontic applications, including visualization of canals, detection of root fractures and diagnosis of periapical lesions due to pulpal inflammation. - AUTOMATIC SETTING OF EXPOSURE TIME
From 0.01 to 2.0 seconds, depending on the patient and tooth characteristics.
What does DC stand for?
MODERN AND CLEAN DESIGN
RiX70 DC has a super-modern design featuring the flattened generator and transparent cone giving the overall unit the feeling of lightness and clarity.
• Steady and strong support arm.
• Length of the arm 40, 60, 80 and 100 cm.
• Compact and light tubehead.
• Hand switch with 3 mt coiled cord.
• Intuitive control panel with quickly identifiable icons.
• Easy and fast installation system.
MORE INFORMATION FOR BETTER RESULTS
The display on the timer shows the exposure parameters, errors and warning messages.
The user-friendly and intuitive design of the icons on the timer allows the user to:
- Adjust exposure parameters according to the selected patient size, tooth type and image receptor.
- Adapt the radiation dose to lower or higher values.
- Modify the exposure time for digital receptor or film.
- Select between 60, 65 or 70 kVp.
Available
in two models
RiX70 DC offers two models that easily integrate into the work environment:
a wall- mounted model with permanent installation and
a mobile stand model for operation in different rooms.
MOBILE
WALL MOUNTED
Optional
REMOTE TIMER (Only available for the wall mounted version)
Install the remote timer outside the X-ray room and set the exposure parameters, type of tooth, patient and image receptor to safely shoot the X-ray. With this option the timer board is blank and the X-ray hand switch with coiled cord is not included.
RECTANGULAR COLLIMATOR
Additional rectangular collimator of 43 mm x 35 mm. The use of a rectangular collimator not only reduces the skin entrance dose of the X-ray beam by as much as two-thirds, which is substantial, but the amount of X-ray scatter as well.
Compatible with any image
receptor available on the market
The RiX70 DC intraoral X-ray unit provides the best results
using Trident’s state-of-the-art digital image receptors,
either I-View Gold/I-View Silver intraoral sensors or PSP phosphor plates.
TRIDENT PHOSPHOR PLATES
I-VIEW SILVER CMOS SENSOR
I-VIEW GOLD CMOS SENSOR
